Well, at least attempting to. Unfortunately it didn’t end very well. A friend of mine broke the glass screen of their Samsung Galaxy Note 9. They have a warranty on […]
3D Printer Supports, Anyone?
I’ve been having a great time with the 3D printer. It’s a bit tedious to constantly adjust every setting to tweak things into a better print, but it really is […]
Colido 3D DIY Slic3r Settings
As promissed, I wanted to make a post with my slicer settings that I use for my Colido 3D DIY printer in Slic3r. Why? Because I’m learning that slicer settings […]
Slicing the perfect 3D print….
Hopefully all of these higher resolution photos show up well in this post, as I wanted to show you what I’ve been working on. Previously, I talked about the difference […]
Home Photo Server, Part 4: Battery Backup
One of the problems that I have with a local server is that we frequently have power “blips”. I don’t want to say outages, because the power is on about […]
Home Photo Server, Part 3: https, keys, and certificates
In the continuing saga of the Google Photos alternative, by running a home server with Dynamic Domain Name Service (DDNS), very secure FTP (vsftp), and an Apache web server coupled […]
Home photo server, part 2: Apache, phpAlbum, and Piwigo
Last time we talked about how to set up the domain name with DDNS for free, and then using very secure FTP, vsftp, and SyncTool (the Android app) to automatically […]
Home photo server, part 1: Server Setup, SCP and FTP
While there are many, many options out there for photo storage, if you are looking for a home storage solution that does NOT involve just plugging in your phone and […]
Using my Colido 3D DIY printer with Cura
As you’ve probably seen before, I’ve got a Colido 3D DIY printer that I’ve used for some of my projects. Prior to today, I was using Repitier-Host as the software […]
Going Gapp-Less, Again….
Don’t worry, you can put the tinfoil hats away. That being said, I’m going Google App Less (gappless) again. A few years back, I tried to go gappless, and it […]