And it wasn't, well, once I learned how to do it properly. Unfortunately it took me an hour to get there! First I monkeyed around with vmware-tools, and vmware-mount, and then I tried kpartx, and all of it was a wash.
Then, after more searching online, I found a guy …
More dreaded whitelist errors! Essentially, an app is trying to do something it should not be allowed to do. You can see the logs here:
E Zygote : java.lang.IllegalStateException: Signature|privileged permissions not in privapp-permissions whitelist: {com.android.systemui: android.permission.NAVIGATION_EDITOR, org.omnirom.omnistyle: android.permission.CHANGE_OVERLAY_PACKAGES, com …
So, you built a rom, and something went wrong. It's stuck at the boot logo, or it does boot up, but doesn't do "xyz" action, or it crashes right after you get to the home screen. You've played this game before, you pull logs, and all you can see is …
[gallery ids="4330,4331,4332,4333,4335,4336,4337,4338" type="rectangular" orderby="rand"]
To God be the glory, I finally finished a XA2 Ultra build of Resurrection Remix! It's Resurrection Remix, Pie flavored! You can check it out on XDA if you would like, but here is my post …
[gallery ids="4302,4301" type="rectangular"]
So it's been a rough start for me, stepping into the modern world with a modern phone that has a/b partitioning and was Android 8.0+. I've built dozens of roms for dozens of phones, some that were even unsupported, and to God …
A while back I switched my LG Watch Urbane (bass) from Android Wear to AsteroidOS. My initial reaction was really positive, but I wanted to come back to post later on how the long term use was going. Truth is, it's great!
Don't get me wrong, Android Wear had some …
Well, at least attempting to. Unfortunately it didn't end very well. A friend of mine broke the glass screen of their Samsung Galaxy Note 9. They have a warranty on it, but they already broke the screen once, and now they would have to pay several hundred dollars to have …
I've been having a great time with the 3D printer. It's a bit tedious to constantly adjust every setting to tweak things into a better print, but it really is a fun hobby! Lately, I've been working on the supports. For those who are new (like me) to 3D printing …
As promissed, I wanted to make a post with my slicer settings that I use for my Colido 3D DIY printer in Slic3r. Why? Because I'm learning that slicer settings matter, big time. If the above picture loaded for you, then you can see that the same 3D model will …
Hopefully all of these higher resolution photos show up well in this post, as I wanted to show you what I've been working on. Previously, I talked about the difference between using Slic3r to slice my stl files into gcode, and I was pointing out that with the exact same …